Example uses of Wonderfreeze:

Vacuum Forming Materials: Hold the can in the
upright position with the nozzle directly next to the
vacuum formed processed material. Pull the trigger
to coat the processed material thoroughly.
Processed material can be removed immediately.

Denture Teeth, Large Amounts of Wax, and Metal:
Hold the can in the upright position with the nozzle
6 to 12 inches from the wax. Pull the trigger and
spray directly on area to be cooled. For denture
teeth, this will hold them in place. For large wax
areas and metal finishing, this will quickly
cool the case.

Crown Work: Wait about 5 minutes until the
metal is no longer red in color. Hold the can in
the upright position with the nozzle about 12 to
14 inches from the full gold crown just soldered.
Pull the trigger and spray the full gold crown and
investment ( if used ) until cooled. This will harden
the metal. Do not spray early for this can
weaken the crown.

Chilling Memory Type Arch Wire: Pull the trigger
and spray on a saturated cotton swab tip and apply to
the wire. For best results, wrap the wire with a piece
of gauze and saturate it with Wonderfreeze. The gauze
should not be dripping prior to application.

Use only as directed. The necessary amount of spray will vary with the different products used. This product may be used in short small bursts or with longer sprays to maximize cooling. Leaves no residue and is moisture free.

Net Wt. 10 oz./283g. Approx. Vol. 234ml.