Z-SHINE Diamond Polish Kit


In one step in 30 seconds or less receive a high gloss finish on all restorations, including hybrid composites, pressed ceramics, and full contour milled zirconia.

Kit includes:
• 5 grams of diamond polish
• #11 Soft Brush Wheel
• 1″ x 1/8″ Felt Wheel


Item #800

Z-Shine Diamond Polish Advantages

  • One Step High Luster Polish
  • 30 Seconds or Less Polish Time
  • Easy Clean Up (20 second clean up)
  • Water Soluble
  • Use With Any Restoration Material
  • Especially Designed for e.max & Zirconia Crowns

Z-Shine in the News

Download Info

Product information is saved in Adobe Acrobat PDF format. Get the FREE Acrobat reader if you can’t open the file.


Z-Shine Diamond Polish

Z-Shine can be used to final polish a milled zirconia bridge with no surface staining or glazing. The layered e.max laminates #6 – #11 are not surface glazed. To obtain a natural surface luster finish on an e.max or on a zirconia restoration, use a #11 soft brush wheel (included in the kit) and Z-Shine.
Teeth #6 and #7 are single crowns with layered zirconia using Vm9 layering and then surface finishing with Z-Shine and a #11 soft bristle brush wheel with no surface glazing. The bridge for teeth #8 – #11 is full contour Zirconia/ Talladium AT high translucent without glaze. The lower anterior restorations #22 – #27 are layered Ceramco 3 feldspathic jackets that are finished by polishing the surfaces with Z-Shine diamond polish and a #11 soft bristle brush wheel.
Another feature of Z-Shine is that the layered e.max #10 restoration is polished with Z-Shine and matches the natural adjacent teeth. Once you have the surface luster you desire the Z-Shine quickly washes off with a tooth brush and water in a few seconds.


Z-SHINE Diamond Polish Kit